Shelf-supports, furniture fittings Holland (Europe) (2024)

for the country Holland

Shelf-supports, furniture fittings Holland (Europe) (1)

Discover Shelf-supports also in the country of Holland (Europe).

Shelf supports are the little metal pieces that hold up shelves when they're installed on a wall. You've seen them before — they're the long metal strips that you screw into the wall and then slide your shelf against.

The reason you need shelf supports for furniture is simple: stability. Shelves rely on those supports to keep them from falling out of place over time.

Another common use for a shelf support is to prevent damage to walls. Some pieces of furniture — particularly dressers — are quite heavy when they're loaded up with clothes and other items. Using a metal bracket helps secure furniture to the wall so it doesn't fall off if someone bumps into it or if there's an earthquake.

Shelf supports are also used to keep bookshelves level and straight. Walls sometimes aren't perfectly straight, which can make shelves look crooked or askew even if they're not. Brackets can be attached to the back of a bookshelf and then to the wall in order to secure them in place and keep them looking neat and tidy.

If you're building shelves yourself, it's best to install them from the get-go with properly sized supports. This way, you know that your shelves are going to be sturdy enough to support whatever you put on them. If you're using a premade shelf, look for crossbars underneath — if there aren't any built in, it's time to go shopping for some shelf supports.

There are many different types of shelf supports for furniture. Each type is designed for a specific type of shelf and load.

A bracket is a shelf support for furniture that attaches to the wall or to another piece of furniture. Brackets are often used on shelves that hold heavier items, such as books and vases. Brackets come in different designs and can be attached with nails or screws.

Braces are shelf supports for furniture that are most often used under shelves, but they can also be used to support the middle of a shelf. The center brace helps prevent sagging in the middle of a shelf and provides more support than brackets. Braces are also useful when attaching shelves to walls with hollow walls or when attaching shelves to posts and beams in unfinished basem*nts or garages.

An angle bracket is shelf support for furniture that attaches directly beneath the shelf, preventing it from tipping forward or backward and keeping it secured. Angle brackets are typically used to attach shelves to countertops, cabinets, and tables.

A cleat is shelf support for furniture that attaches to the back of a shelf or cabinet to help prevent it from tipping forward or backward while still allowing it to slide out easily when needed. A cleat can also be used under table legs if they

Wall-mounted shelf supports are the most common type of shelf support used in homes today. They are attached directly to the wall and provide good support for items placed on them. You will find these supports in kitchens, bedrooms, and living rooms throughout homes all over the world. The supports can be made out of various materials including plastic, wire, and wood.

Shelf supports for all your shelves

Some consumers may not know that not all shelves are designed to hold the same weight. Shelves used for storage are generally sturdier and can hold more weight than those used for display. However, it may be necessary to install additional supports to ensure that your shelves remain sturdy and don't sag over time.

If you're using a more decorative shelf for display purposes, you may want to add supports for stability. If you've never added shelving to your home before, it's important to pay attention to the weight of your items and consider whether the shelf will be able to support the stored items.

When deciding if you need shelf supports or not, consider these factors:

What are you storing? Are there heavy books, dishes, or appliances on the shelf? These objects can put unnecessary strain on your shelves and cause them to bend or break over time.

Will your objects be stored together or separately? If you plan on storing lots of items together in one area of shelving, such as books in a bookcase, there's less chance of something falling on top of another object and breaking it. Keeping objects separate increases the chances that an object will fall and break another item, creating an even bigger mess.

Here are some shelves that you may need to add shelf supports for stability
● Custom Shelves – If you have custom shelving that was made for your home, then it is likely that they come with special support and not just standard shelving brackets.
● Mirrored Shelf – Mirrored shelves also need supports because mirrors are heavy and need to be supported in order to avoid breaking and causing injury.
● Wall Mounted Shelves – If your wall-mounted shelves are not installed properly and securely, it could cause them to fall off the wall, especially if they are loaded with items that weigh a lot.

Offering the best quality shelf supports

If you are looking for the perfect support for your furniture, you have come to the right place. We have a wide selection of shelf supports that are perfect for your needs. These supports are made from high-quality materials and built to last. The materials used to build the supports are sturdy and will not break easily.

The shelf supports we carry are easy to install and they won't take up a lot of room in your home. They make it possible for you to display things on your furniture such as artwork and collectibles.

These supports are designed to fit into the grooves on wood furniture pieces like desks and cabinets. They will not damage the wood when installed properly because they fit snuggly into the grooves. The shelf supports will also keep your items looking nice by preventing them from falling off the furniture piece.

The shelf supports are very affordable, so you can afford several to use with different pieces of furniture in your home. You can buy several different styles of these products so you can change them out whenever you want a new look for your furniture or decorations in your home

Other country near Holland (Europe) where you can find Shelf-supports

  • Estonia
  • Italy
  • France
  • Germany
  • England
  • Spain
  • Russia
  • Greece
  • Albania
  • Portugal
  • Belgium
  • Norway
  • Sweden
  • Finland
  • Slovenia
  • Croatia
  • Austria
  • Swiss
  • Bulgaria
  • Hungary
  • Romania
  • Poland
  • Czech Republic
  • Slovak Republic
  • Lithuania
  • Latvia
Shelf-supports, furniture fittings Holland (Europe) (2024)

FAQs

What are cabinet shelf supports called? ›

A very common variant is an L-shaped shelf support, which is also called shelf bracket, and can be seen as a subset of angle brackets.

What is the best type of shelf support? ›

L-shaped brackets with pins are a good choice for shelves that need to support a lot of weight.

How do you install shelf supports? ›

How To Install Center Shelf Supports
  1. Locate stud in back wall. Measure to desired shelf height and mark location. ...
  2. Next, snap the bracket into the back plate. ...
  3. Place the shelf on the bracket and secure it by fastening wood screws through the holes in the wings at the top of the bracket.

How far apart should shelf supports be? ›

For light to medium loads, shelving brackets should be spaced no more than 24 inches apart. For longer wire shelving, attach a bracket at least every 48 inches. For heavier loads, increase the size of your brackets and decrease the space between them.

How do you support a sagging cabinet shelf? ›

Adding more shelf pegs can help straighten out sagging shelves, though you'll need a drill for this DIY fix. Replacing the shelf with extra pegs provides more support points to distribute weight and prevent future sagging. This solution maintains the original look while reinforcing weak shelves.

What are shelf brackets called? ›

L Brackets:

These are the most general, simple shelf brackets. These are also often called an angle bracket and the easiest to use.

How thick should shelf supports be? ›

Support rods are large enough diameter

Typical shelf depths are 12” for kitchen, 10” for living room/bookshelves. A 3/4” diameter rod will handle both with ease. Using smaller rods like 5/8" or 1/2" means you wont be able to go as deep, or hold as much. Using larger diameter rods means you can go deeper.

Which way do shelf supports go? ›

You should fit shelf brackets with the longer arm against the wall and the shorter one under the shelf. Remember, the length of the longer arm will show you how closely you can fit the shelves on top of each other. Tools for the job: A pipe, cable and stud detector.

How much weight can shelf supports hold? ›

For every stud your bracket is attached to, your floating shelf can hold 50lbs. That means if you've got a three-foot shelf attached to two studs, your shelf can safely hold 100 lbs. If you've got a two-foot shelf attached to two studs, the same goes — it can hold 100 lbs.

What are the things called that hold up a shelf? ›

There is a plenty of shelf brackets that you can buy on the market. They are made of various types of metal and are generally considered a reliable and fast shelf hanging solution. They are fixed to the wall with screws and anchors.

What are the little things called that hold up shelves? ›

Shelf supports are designed to support and fix a shelf safely and securely to a wall. They are available in various sizes and styles and can usually be used with a range of materials, such as glass, wood or metal shelves.

What is used to support shelves? ›

The piece of wood you'd put on the wall to hold up shelves is commonly referred to as a "shelf bracket" or simply a "bracket." These brackets come in various designs and materials to support different types of shelves. When installing shelves, ensure the brackets are securely anchored to wall studs for proper support.

How to support a shelf in a cabinet? ›

For less formal work, place a simple cleat under each end of the shelf. This approach works best when the cabinet side is made of plywood or another manufactured material, so you don't have to be concerned with the screws restraining its movement. Fasten the shelves to the cleats with screws driven from below.

Top Articles
Latest Posts
Article information

Author: Kelle Weber

Last Updated:

Views: 5858

Rating: 4.2 / 5 (53 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Kelle Weber

Birthday: 2000-08-05

Address: 6796 Juan Square, Markfort, MN 58988

Phone: +8215934114615

Job: Hospitality Director

Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.